Casting Waxes
TYPES – Regular, Hard, and #6.
COLORS – Blue, Green, Yellow, Red.
ASSORTED COLORS –
(3 sticks each per box) Blue, Yellow, Green, Red in all types.
Whip Mix inlay waxes are compounded for use in the production of the finest inlays. They may be flowed in the liquid state, softened over a flame, or in water at 54-60 degrees C (130-140 degrees F) and are easily adaptable to the cavity without crumbling. They maintain an even degrees of workability over a wide temperature range, assuring ease and accuracy of adaption under pressure. Wax additions and corrections may be made with resultant homogeneous bonding. They are particularly outstanding for their excellent carving properties, shave smoothly without chipping or flaking. They conform to F.D.I. Spec. No. 4.
The REGULAR type is especially suited for indirect work at room temperature, or general use in cool weather.
The HARD type has a low flow property and is thus eminently suited for general use in warm weather. The #6 type is similar in flow to the Regular and is physically harder in carving. Bulk packaging is available in all types and colors.
Pliable Sticky Wax (Light Orange)
Its unusual tenacity ensures a positive attachment of patterns to sprue pins. Does not become brittle but retains its “tacky” property throughout a wide range of room temperatures. It has a low ash content, so elimination during burnout is readily achieved.
Regular Sticky Wax (Red)
A superior wax for all usual applications. Rigid at room temperature without being overly brittle. Flushes away cleanly with boiling water.
-80x80.jpg)
